|
|
| CAPACITY |
| Grinding diameter range |
1 to 80 mm (1/16” to 3”) |
| Maximum infeed grinding length |
250 mm (10”) |
| Floor space |
3.300 x 1.840 mm (11' x 6') |
| Total approximate weight |
8.000 kgs (17.600 pounds) |
| WHEEL DIMENSIONS |
| Grinding wheel – OD, width, ID |
508 x 254 x 254 mm (20” x 10” x 10”) |
| Regulating wheel – OD, width, ID |
355,6 x 254 x 203,2 mm (14” x 10” x 8”) |
| SPEEDS |
| Grinding wheel (constant peripheral speed) |
up to 120 m/sec (23500 sfpm) |
| Regulating wheel |
0 to 1000 RPM |
| POWER |
| Grinding wheel spindle |
20 kW |
| Regulating wheel spindle |
10 kW |
| SERVO-MOTORS |
| Grinding wheel dressing servo-motor |
INDRAMAT 2,4 Nm |
| Regulating wheel dressing servo-motor |
INDRAMAT 2,4 Nm |
| Grinding wheel headstock motor |
INDRAMAT 8 Nm |
| Regulating wheel headstock motor |
INDRAMAT 8 Nm |
| GUARANTEED PRODUCTIVITY |
| Throughfeed grinding |
1 to 25 m/minute (40 to 1.000”/minute) |
| Infeed grinding |
220 pieces/hour |
|
|
 |
|
